traffic vehicle analysis Features:

Supply 240VAC

Adjustable sensitivity (16 levels via a trimpot)

2 x Relay outputs (each can be configured individually)

Power up and loop activation LED indicator.

Industry standard 11-way plug-in type circular connector.

Description:
The digital technology of the loop detector enables the equipment to sense a change in the inductance of the
loop as soon as it detects the metal object in its path.
The inductive loop which detects the object is made of
insulated electrical wire (32/020; 32 Strand, 2mm
diameter) and is arranged either as a square or
rectangle shape.
The loop consists of several loops of wire and consideration
should be giving to the loop sensitivity when installing on different surfaces. Setting the correct sensitivity allows the loop to operate with maximum detection (16 levels via a trimpot). When detection occurs, the detector energises 2 relays for the output (each can be configured individually). This energising of the relay can be configured into different modes, by selecting the respective dip switch.

Traffic vehicle loop detector manufacturers Specifications：
Supply Voltage
LD-105：85-240VAC (50Hz)
LD-106：12V~24VADC
Power Consumption
Max. 6VA
Loop Inductance
20-2000μH
Frequency Rang
20-80 kHz
Sensitivity
ΔL 0.01% to 2.56% with 16 Selectable Levels
Loop Lead
＜500m
work temperature
-40 to + 70 ℃
Relay
Operating/no load current principle adjustable via switch
Signal Period, Impulse Time
＞250ms
Response Time
8~80 ms
USA 11-pin connect

Single channel traffic vehicle detection troubleshooting:

Symptoms		Solution
If the detector is not working		Press reset
If red led indicator is not fully lit		Check for power supply
If green led indicator:	Blinks slowly	It maybe because the loop is short circuit or the no: of turns is not enough.
	Blinks faster	It maybe because the loop is open or the no: of turns is too many.
If no: of turns is not enough		Lower the frequency (if the frequency is still too high, you must add more turns).
If no: of turns is too many		Higher the frequency (if the frequency is still too low, you must remove some turns).

    

 

 

 

 

 

 

 

 

Similar Vehicle detector Link:
gate loop detector
inductive loop vehicle detector
vehicle loop detector installation
vehicle loop detector price
vehicle loop detector manufacturers